Plank - Processing and finishing
General processing: For professional processing only, Plexwood is composed of end grain wood and wood with the grain, this means that sanding, filling, cutting, gluing and finishing differs significantly from other wood products, follow the instructions of the products chosen, and the general guidelines below
Pre-processing: With the exception of acoustic materials, our materials are supplied as semi-finished products. This means that regular pre-treatment can be expected prior to the final finish, such as light sanding, (re)filling and colouring of small irregularities in the veneer, for an optimal end result
Acclimatization: Allow Plexwood to acclimatize under the conditions in which it will be used
Sanding: Plank is as standard sanded 80-grit, the veneer layers differ in hardness, sand concentrically/rotating, belt sanding or sanding with an orbital disk is generally not suitable for this product
Filling: Plank is as standard filled, the veneer layers differ in absorption capacity, therefore work with wood fillers that are suitable for end grain wood, generally, fast-drying wood fillers are not appropriate, run a test if necessary
Gluing: Use a suitable non-water based construction glue, or a PU glue, generally, white water-based wood glues are not appropriate, run a test if necessary
Fixation: Dependent on the application, t-brads or mini-brads with small heads are usually suitable to fixate the plank with glue to the floor or substrate
Battenwork: Plank for wall and ceiling can be installed using Battenwork. Install wooden battens in an appropriate manner, with a distance between each batten of at most 400 x 400 or 400 x 600 mm. Apply construction glue to batten framework, place Plexwood product into glue, and secure using for instance t-brads or mini-brads with small heads. Always ensure that seams (where 2 parts connect) are joined securely on a shared batten
Clip system: Plank for wall and ceiling can also be installed using a wall hanging/clip system. Always ensure that the clip system is suitable for natural wood products, and always follow the installation guidelines from the manufacturer
Finishing with oil/wax: Plexwood is composed of end grain wood veneer, which has a higher absorption quality than wood with the grain, therefore work with oil and wax that is suitable for this type of wood structure. Generally, very thin or diluted agents are not appropriate. The manufacturer of the product in question can inform you whether their product is suitable, run a test if necessary
Finishing with varnish: Plexwood is composed of end grain wood veneer, which has a higher absorption quality than wood with the grain, always choose an appropriate finish, as not all acrylics and water-based varnishes are suitable for Plexwood. Generally, very thin or diluted agents are not appropriate. The manufacturer of the product in question can inform you whether their product is suitable, run a test if necessary