
Strip - Processing and finishing
General processing: For professional processing only, Plexwood is composed of end grain wood and wood with the grain, this means that sanding, filling, cutting, gluing and finishing differs significantly from other wood products, follow the instructions of the products chosen, and the general guidelines below
Acclimatization: Allow Plexwood to acclimatize under the conditions in which it will be used
Sanding: Strip is as standard unsanded, the veneer layers differ in hardness, sand concentrically/rotating, belt sanding or sanding with an orbital disk is generally not suitable for this product
Filling: Strip is as standard unfilled, the veneer layers differ in absorption capacity, therefore work with wood fillers that are suitable for end grain wood, generally, fast-drying wood fillers are not appropriate, run a test if necessary
Gluing: Use a suitable non-water based construction glue, or a PU glue, generally, white water-based wood glues are not appropriate, run a test if necessary
Fixation: Dependent on the application, t-brads or mini-brads with small heads are usually suitable to fixate the Strips with glue to the sub-floor or substrate
Finishing with oil/wax: Plexwood is composed of end grain wood veneer, which has a higher absorption quality than wood with the grain, therefore work with oil and wax that is suitable for this type of wood structure. Generally, very thin or diluted agents are not appropriate. The manufacturer of the product in question can inform you whether their product is suitable, run a test if necessary
Finishing with varnish: Plexwood is composed of end grain wood veneer, which has a higher absorption quality than wood with the grain, always choose an appropriate finish, as not all acrylics and water-based varnishes are suitable for Plexwood. Generally, very thin or diluted agents are not appropriate. The manufacturer of the product in question can inform you whether their product is suitable, run a test if necessary