Profile - Characteristics edges, skirting
Profile for transition strip for uneven floors, edge finishing and skirting
Structure: Solid wood composed of end grain wood and wood with the grain veneers
Delivery: Sawn and/or milled, unsanded and unfilled, per skirting
Available in: Birch, Beech, Oak, Pine, Pine/Ocoumé, Meranti, Ocoumé, Poplar, Deal
Combination of wood: Different combinations of kinds of wood are possible, upon request
Standard dimensions, l x w x t:
± 94.49 x 0.71 x 0.24"
± 94.49 x 0.71 x 0.71"
± 94.49 x 0.71 x 0.71 (milled quarter round)"
± 94.49 x 1.42 x 0.71 (milled quarter round)"
Optional dimensions: Upon request, l x w x t variable
Standard veneer: 0° long grain (l) = 94.49"
Optional veneer: Profile is only available with the lining over the length of the panel
General processing: For professional processing only, Plexwood is composed of end grain wood and wood with the grain, this means that sanding, filling, cutting, gluing and finishing differs significantly from other wood products, follow the instructions of the products chosen, and see our general guidelines
Reference samples: Wood is a natural product, varying in composition, on this website displayed, requested and/or delivered samples are reference samples, requesting a production sample is recommended
Transport/storage: Avoid extreme swings in air humidity and temperature, at all times, allow Plexwood to acclimatize before processing, avoid exposure of unfinished Plexwood to direct sunlight and avoid contact with penetrating fluids or substances
Colour fastness: The influence of sunlight can cause changes in colour
Application possibilities: For the interior, as per the above specifications, Profile is mainly used for transition strips for uneven floors, edge finishing and skirting
Size conversion: Plexwood uses the metric system in all formal communication. No rights can be derived from size conversions to the imperial system. Plexwood converts sizes for your convenience only