What is the build-up and finish of Strip?

Strip is composed of solid wood of end grain wood and wood with the grain, Strip is delivered sawn, unsanded and unfilled

What can Strip be used for?

Strip is a multifunctional product that can particularly be used for fixed flooring (classic tapis), staircase, podium, edge finishing and skirting

What are the characteristics of Strip as floor?

Strip is a classic tapis for the floor, that needs to be fully glued onto the substrate (an intermediate floor is necessary), which results in a durable floor

What is the ordering unit?

Per pack of approximately 2 m² (21.53 ft²), or per strip

What are the standard sizes of Strip?

Strip is available in the following standard sizes, l x w x t:
± 47.24 x 2.76 x 0.24"
± 94.49 x 2.76 x 0.20 / 0.39 / 0.55"

What is the production time?

One week, depending on stock

Can the strips be delivered pre-sanded?

Upon request the strips can be delivered pre-sanded at additional charge

Can Strip be used for stairs?

Strips can also be used to cover stairs, whether this is the right product for stairs depends on the type of staircase, we advise you to contact us directly to discuss the options

How can Strip be installed?

For information about installation of Strip please see our floor installation guidelines and/or processing and finishing

Is it possible to install Strip in combination with (floor) heating?

Strip can be installed in combination with (floor)heating, the surface temperature of the sub-floor may not exceed 82.4 ºF (supplementary heating), refer to the heating protocol, preferably installed according to the spiral casing principle, for further information please see the floor installation advice for Strip

What can be done in the case of a very specific question with regard to the application of Strip?

This website is intended to give information about Plexwood in general terms, but cannot replace personal advice, please contact us for more information