Acoustic - Processing and finishing - Acoustic - Plank
Processing and finishing
General processing: For professional processing only, Plexwood is composed of end grain wood and wood with the grain, this means that sanding, filling, cutting, gluing and finishing differs significantly from other wood products, follow the instructions of the products chosen, and the general guidelines below
Acclimatization: Allow Plexwood to acclimatize under the conditions in which it will be used
Sanding: This product is as standard delivered finished, therefore further processing such as sanding is not necessary
Filling: This product is as standard delivered finished, therefore further processing such as filling is not necessary
Fixation: This product is delivered with a corresponding installation (clip) system, always follow the enclosed installation guidelines
Battenwork: Install wooden battens appropriately with the enclosed installation guidelines. Always ensure that seams (where 2 parts connect) are joined securely on a shared batten, on all sides
Gluing: When needed, use a suitable non-water based construction glue, or a PU glue, generally, white water-based wood glues are not appropriate, run a test if necessary
Additional installation options: The desired acoustic resonance of Plank in the space can be further improved through the use of (stone wool) insulation material (or similar product) placed in between battens, depending on your technical requirements
Finishing: This product is as standard delivered finished with a matt fire-retardant, UV-cured polyurethane acrylic varnish, further finishing of this product is not necessary