Pine/Ocoumé - Finish references - Colouration

Plexwood - Pine/Ocoumé finish: Colouration, reference

Delivery: Except for Acoustic, Plexwood is delivered semi-finished. With the finish the end result and colour is determined

Properties of this type of finish: There are various possibilities of introducing pigment onto the wood, such as a whitewash (chalk wax), a pigmented transparent lacquer, oil, or wax; it is also possible to apply a coloured primer to enhance the colour

Effect on colour balance of the wood: Dependent on the type of colouration chosen

Finishing advice: Plexwood is partly composed of end grain wood veneers, which have a higher absorption quality than wood with the grain, always choose an appropriate colouring agent, as not all acrylics and water-based varnishes are suitable for Plexwood. Generally, very thin or diluted agents are not appropriate. The manufacturer of the product in question can inform you whether their product is suitable, and if necessary, run a test

Maintenance: Dependent on the type of colouration chosen, generally a varnish layer requires less maintenance than oil/wax, but cannot be retouched locally. Always use a maintenance product that corresponds with the original finisher. The manufacturer of the chosen product usually has corresponding maintenance polishes available

The brand name Plexwood® is registered and the product is protected
© 2022 Plexwood

Visit Plexwood on Facebook Plexwood Houzz Plexwood Archello Plexwood home