Acoustic - Acoustic - Tile

Acoustic - Tile for wall and ceiling

Structure: Veneer composed of end grain wood and wood with the grain veneers, glued onto one side of a substrate, groove and slip tongue connection, and an acoustic fleece on the reverse side

Delivery: With perforation and an acoustic fleece on the reverse side, finished with a matt flame-retardant, UV-cured polyurethane acrylic varnish, delivered with corresponding installation (clip) system, per tile

Available in: Birch, Beech, Oak, Pine, Pine/Ocoumé, Meranti, Ocoumé, Poplar, Deal

Combination of wood: Different combinations of kinds of wood are possible, upon request

Standard dimensions, l x w x t:
± 400 x 400 x 17.5 (15 mdf + 2.5 Plexwood) mm
± 600 x 600 x 17.5 (15 mdf + 2.5 Plexwood) mm
± 1200 x 1200 x 17.5 (15 mdf + 2.5 Plexwood) mm

Standard veneer: 0° long grain (l) = 400 > 1200 mm

Optional veneer: 90° cross grain (l) = 400 > 1200 mm, geometric patterns, diagonal 15°, 30°, 45°, square/rectangle 0°/90°, herringbone +15°/-15°, +30°/-30°, +45°/-45°

Standard substrate: 15 mm mdf, low-formaldehyde E1 / PEFC/FSC mixed sources

Optional substrate: Mdf TSCA-compliant or zero added formaldehyde, mdf fire retardant (Euroclass B) or mdf fire retardant (Euroclass B) and TSCA-compliant, others upon request

Optional build-up: Tile in combination with a regular backing veneer of 2.5 mm ocoumé (for additional stability, depending on dimensions and hanging system)

Standard acoustic pattern:
Micro-perforation T-8, regular pattern, front ∅ 1.5 mm and rear ∅ 5 mm, c-t-c 8 mm, αw (Alpha value) is 0.50, NRC is 0.65

Optional acoustic patterns:
Medium-perforation T-16, regular pattern, front ∅ 3 mm and rear ∅ 5 mm, c-t-c 16 mm, αw is 0.65, NRC is 0.65
Macro-perforation D-16, regular pattern, front ∅ 5 mm and rear ∅ 5 mm, c-t-c 16 mm, αw is 0.40, NRC is 0.45

Special acoustic patterns: Upon request

Acoustic testing: Test results and data shown are based on ISO 354:1985, according to EN 20354, 1993 acoustic measurement of sound absorption in a reverberation room, ISO 11654:1997 acoustic sound absorbing for use in buildings, and ASTM-C-423-90a acoustic standard test method for sound absorption coefficients by the reverberation room method. All these tests were carried out on veneered and varnished panels, complete with acoustic patterns, with an acoustic fleece on the reverse of each panel and a 50 mm stone wool layer with a density of 46.3 Kg/m³. Measurements and calculations were carried out on a 1/3 octave band with a bandwidth of 125 - 4000 Hz

Reference for sound absorption measured: The actual degree of sound absorption (αW) and Noise Reduction Coefficient (NRC) is influenced by the exact distance between the panel and the building wall or ceiling

Specifications varnish: Matte flame-retardant polyurethane acrylic UV-cured varnish, scratch resistant, dirt and water repellent, non-toxic, free of formaldehyde and VOCs and 100% recyclable

General processing: For professional processing only, Plexwood is composed of end grain wood and wood with the grain, this means that processing differs significantly from other wood products, when applicable, follow the instructions of the products chosen, and see our general guidelines

Assembly Acoustic - Tile: When composing acoustic materials with a perforation pattern, consider how this pattern can best be assembled for optimal results. This will have to be assessed visually while processing. If necessary, cut to size to achieve this and connect the tiles together properly

Reference samples: Wood is a natural product, varying in composition, on this website displayed, requested and/or delivered samples are reference samples, requesting a production sample is recommended

Transport/storage: Avoid extreme swings in air humidity and temperature, at all times, allow Plexwood to acclimatize before processing, avoid contact with penetrating fluids or substances

Colour fastness: The influence of sunlight can cause changes in colour

Application possibilities: For the interior, as per the above specifications, Tile is mainly used for (exhibition) walls and ceilings

Technical specifications

The brand name Plexwood® is registered and the product is protected © 2014-2024 Plexwood

Visit Plexwood on Archello Visit Plexwood on Archiproducts Visit Plexwood on Architonic Visit Plexwood on Facebook Visit Plexwood on Houzz Visit Plexwood on Instagram Visit Plexwood on Linkedin Visit Plexwood on Pintrest

Plexwood home