Frequently Asked Questions - Plexwood - Panel two-sided

What is the build-up and finish of Panel two-sided?

Panel two-sided is composed of veneer of end grain wood and wood with the grain, glued onto two sides of a substrate, delivered filled and sanded 80-grit


What can Panel two-sided be used for?

Panel two-sided is a multifunctional product that can particularly be used for dividing walls, doors, ceiling and furniture (with a Plexwood veneer of 2.5 mm, filled, sanded 80-grit) or staircases and podia (with a Plexwood veneer of 4.5 mm, filled, sanded 80-grit), amongst others


What is the ordering unit?

Per panel


What are the standard sizes of Panel two-sided?

Panel two-sided is available in the following standard sizes, l x w x t:
± 2400 x 1200 x 23 (2.5 + 18 + 2.5) / 27 (4.5 + 18 + 4.5) mm
± 2400 x 1200 x 41 (2.5 + 18 + 18 + 2.5) / 45 (4.5 + 18 + 18 + 4.5) mm


What kind of substrates are available for Panel two-sided?

Mdf or plywood low-formaldehyde E1 / mixed sources PEFC/FSC, mdf or plywood TSCA compliant or mdf zero-added formaldehyde, mdf or plywood fire retardant (Euroclass B), mdf moisture resistant V313, colour-stained mdf (black, brown, yellow, orange, red, purple, green, blue or grey), door- and sandwich panels, lightweight and maritime panels, others upon request


What is the production time?

Upon request, in general about 3 - 4 weeks, depending on volume and specifications


Can Panel two-sided be used for stairs?

Panel two-sided can be used for stairs, whether this is the right product for stairs depends on the type of staircase, you can always contact us for more information


Can Panel two-sided be used for making doors?

For door constructions Panel two-sided is recommended because of the stable build-up. Note that the size of a door should be in proportion to the thickness, for instance for ± 600 x 600 mm (kitchen cabinet doors) we advise a build-up with at least an 18 mm substrate, and for ± 2150 x 800 mm (interior doors) we advise a build-up with at least an 18 + 18 mm substrate


Is Panel one-sided with a backing veneer sufficient balance to use for doors?

For doors a stable build-up is required, this can only be achieved with the same veneer on both sides (both kitchen cabinet size and interior doors)


Is Panel two-sided also available in geometric patterns?

Depending on the geometric pattern chosen, Geometric is available as Plank, Tile, and Panel one-sided


What can be done in the case of a very specific question with regard to the application of Panel two-sided?

This website is intended to give information about Plexwood in general terms, but cannot replace personal advice, please contact us for more information

The brand name Plexwood® is registered and the product is protected

Visit Plexwood on Facebook Plexwood Houzz Plexwood Archello Plexwood home