What is the build-up and finish of Panel one-sided?

Panel one-sided is composed of veneer layers of end grain wood and wood with the grain, glued onto one side of a substrate, delivered filled and sanded 80-grit

What can Panel one-sided be used for?

Panel one-sided is a multifunctional product that can particularly be used for wall cladding, ceiling and furniture (with a Plexwood veneer of 2.5 mm, filled, sanded 80-grit) or staircase and podium (with a Plexwood veneer of 4.5 mm, filled, sanded 80-grit)

What is the ordering unit?

Per panel

What are the standard sizes of Panel one-sided?

Panel one-sided is available in the following standard sizes, l x w x t:
± 2400 x 1200 x 14.5 (12 + 2.5) / 16.5 (12 + 4.5) mm
± 2400 x 1200 x 17.5 (15 + 2.5) / 19.5 (15 + 4.5) mm
± 2400 x 1200 x 20.5 (18 + 2.5) / 22.5 (18 + 4.5) mm
± 2400 x 1200 x 38.5 (18 + 18 + 2.5) / 40.5 (18 + 18 + 4.5) mm

What kind of substrates are available for Panel one-sided?

Mdf or plywood low-formaldehyde E1 / mixed sources PEFC/FSC, mdf or plywood TSCA compliant or mdf zero-added formaldehyde, mdf or plywood fire retardant (Euroclass B), mdf moisture resistant V313, colour-stained mdf (black, brown, yellow, orange, red, purple, green, blue or grey), door- and sandwich panels, lightweight and maritime panels, others upon request

What is the production time?

Upon request, in general about 3 - 4 weeks, depending on volume and specifications

Can Panel one-sided be used for stairs?

Panel one-sided can also be used for covering stairs, whether this is the right product for staircases depends on the type of staircase, please contact us for more information

How can Panel one-sided be fixated to a wall?

Fix Panel one-sided onto a batten framework. Install wooden battens in an appropriate manner, with a distance between each batten of at most 400 x 400 or 400 x 600 mm. Apply construction glue to batten framework, place Plexwood product into glue, and secure using, for example, t-brads or mini-brads with small heads. Always ensure that seams (where 2 parts connect) are joined securely on a shared batten, on all sides

Can Panel one-sided be used for making doors?

For door constructions Panel two-sided is recommended. Note that the size of a door should be in proportion to the thickness

Is Panel one-sided with a backing veneer sufficient balance to use for doors?

For doors you need a stable build-up that can only be achieved with the same veneer on both sides, therefore, Panel two-sided is recommended for doors (both kitchen cabinet size and interior doors)

Is Panel one-sided also available in geometric patterns?

Depending on the geometric pattern chosen, Geometric is available as Plank, Tile, and Panel one-sided

Is Panel one-sided also available with acoustic characteristics?

For acoustic applications, please see Plexwood - Acoustic

IWhat can be done in the case of a very specific question with regard to the application of Panel one-sided?

This website is intended to give information about Plexwood in general terms, but cannot replace personal advice, please contact us for more information